# /etc/nut/ups.conf  -- MASTER (USB-connected host)
# PowerWalker VFI ICR IoT via nutdrv_qx over USB.
#
# Uncomment the protocol/novendor/runtimecal lines only if the bare
# config does not return clean values. See README for the test command.

[ups]
    driver = nutdrv_qx
    port = auto
    desc = "PowerWalker VFI ICR IoT"
    pollinterval = 5

    # Fallbacks (enable if needed):
    # protocol = voltronic
    # novendor
    # runtimecal = 600,100,1200,50